Top Plastic Engineering Works

 

POLYPROPYLENE VALVES
PP Damper Valves
PP Three Piece Flange End Ball Valve
PP Three Piece Screwed End Ball Valve
PP Union Assembly Screw And Plain End Ball Valve
PP Union Type Assembly Screw And Plain End Ball Valve
PP Diaphragm Flange End Valve
PP Diaphragm Valve Screw End
PP Sight Glass Flange End
PP Non Return Valves Flange End
PP Butterfly Valves
PP Foot Valves Flange End
PP Foot Valves Screw End
 
PP Diaphragm Flange End Valve
 

PP Diaphragm Flange End Valve

 

Bill of Material
 
Sr.No. Part Qty. Material
 
1. Body 1 Polypropylene
 
2. Bonnet 1 Polypropylene
 
3. Hand Wheel 1 Polypropylene
 
4. Diaphragm 1 Diaphragm
 
5. Compressor 1 Aluminium / C.I.
 
6. Stem 1 M.S / S.S
 
7. Nut 1 M.S / S.S
 
8. Pin 1 M.S / S.S
 
9. Bolt,Nut,Washer 4 M.S / S.S
10. Diaphragm Stud 1 Brass / M.S.
 
11. Cap 1 Polypropylene
 
   
 
Technical Data
Valve Size Flange Diameter Length
Face to Face
Flange Thikness Height Centre (H)
15(1/2") 96 122 16 82
20(3/4") 100 122 17 105
25 (1") 112 141 20 114
40 (1.1/2") 134 166 21 173
50 (2") 153 200 24 203
65 (2.1/2") 184 245 24 218
75 (3") 184 245 24 218
 
Special Features of Diaphragm Flange End.
1. One piece rugged body haveing lower rifb connecting both Flanges makes the valve absolutely strong enough to withstand external and internal loads developed on a pipeline.
2. Latest inverted type Diaphragm remains unstressed while the valve is in closed condition. This plus point makes the life of Diaphragm double than the conventional old type Diaphragm available in market.
3. Deeper seat allows maximum flow through valve and gives excellent throutling charcteristics
4. The perfectly matched seat and compressor gives bubble tight closer even in solurry applications, and with a single hand torque valve can be closed against 10 Kg/CM² pressure.
5. Available with Neoprene, Teflon coated or pure teflon Diaphragm.
6. Our Valves are Saunders 'A' Type available with flanged ends to BS Table 'D', 'E', ANSI-150 and DIN Std. Flange drillings in Screwed ends to BSP.
7. Every Assembled Diaphragm Valve undergoes functional and pressure testing of body and seat hydrotest of 6" upto 10 Kgbefore despatch.
8.Our Diaphragm valves are ideally suited to the handling of severely contaminated, aggressive and non-aggressive media. Application in Water Treatment (Ion-Exchanger), Desalination, Sew-age Treatment, Electroplating, Photography, Electronics, Chemical and Food Industries are just a few of the countless examples
9. Hydraulically Tested - Body & Seal at 10Kg. (165psi)
10. Flange Drilled to table D.BS - 10
 


 

PP DIAPHRAGM FLANGE END VALVE
 
Copyright 2008 | Plastic Engineering Works. All Rights Reserved.
| | | |