Top Plastic Engineering Works

 

FABRICATED ITEMS
Electroplating Barrels | Electroplating Filter Unit | Electroplating Dryer |
Chemical Storage Tanks / Process Tank / Mixing Tank
Electroplating Tanks
Fume Scrubbers
Centrifugal Exhaust Fan
Hoods & Ductings
FRP MOTOR COVERS
PVC CABLE TRAYS
FRP / GRP Cable Tray
PP Demister Pad
FRP PIPES
FRP PIPE FITTINGS
Other Fabricated Items
HDPE Welding Mirror
Welding Torch
 
Electroplating Barrels | Electroplating Filter Unit | Electroplating Dryer |
 
CENTRIFUGAL DRYER FOR ELECTROPLATING :

1) Capacity 7.5 kg - Basket Size 12" dia x 9" height approx. Option for single phase as well as three phase using 1/2 HP electric motor 1440 rpm. Basket MOC can be MS or SS. Heater will be 1 KW or 1.5 KW.

2) Capacity 15 kg - Basket Size 18" dia x 11" height approx. Option for single phase as well as three phase using 1 HP electric motor 1440 rpm. Basket MOC can be MS or SS. Heater will be 2 KW or 2.25 KW.

3) Capacity 30 kg - Basket Size 21" dia x 12" height approx. Option for single phase as well as three phase using 2 HP electric motor 1440 rpm. Basket MOC can be MS or SS. Heater will be 2 KW or 2.25 KW.

Note : The above size and specifications mentioned are approximate and are subject to change without prior notice.

 

FILTERS FOR ELECTROPLATING :

1) Cartridge Filter - We can supply cartridge filters used in the silver and gold plating industry. It uses magnetic type motor pump of approx. capacity 30 LPM. Again option for both single phase as well as three phase is available.

2) Small Plate type Filter - We can supply plate type small filter which has two models, one that has 9 plate using 30 LPM magnetic pump. The other model has 12 plates using 50 LPM magnetic pump. Again option for both single phase as well as three phase is available.

3) Big Plate type Filter - This is generally used in nickel plating or copper plating. This uses both type of magnetic pump or non-magnetic pump depending on customers requirement. This has two models, one model is of 9 plate filter and other model is of 18 plate filter. Depending on requirement and tank size the motors used are generally 1/2 HP, 1 HP, and 2 HP three phase 1440 rpm.

Note : The above size and specifications mentioned are approximate and are subject to change without prior notice.

 

PLATING BARREL :

We can supply fabricated plating barrels in capacities of 5 kg, 7.5 kg, 15 kg and 30 kg. We can also fabricate special barrels as per your requirement. Also we can supply fabricated barrels for automatic plant as per your specific size and requirement. We can also supply along with Tanks. The MOC of the Tanks can be only PP, MS/PPGL, or MS with flexible PVC lining. If required we can also supply complete barrel unit i.e. with barrel tank, & gearbox with motor. We can also supply PP moulded V blocks. 

 

 

Automatic Electroplating Barrel
 
Electroplating Barrels
 
Electroplating Filter Unit
 
Electroplating Dryer
 
Double Decker Electroplating Filter Unit
 

Automatic PP Electroplating Barrel
 
Oven For Electroplating
 
Oven For Electroplating
 
Copyright 2008 | Plastic Engineering Works. All Rights Reserved.
| | | |