Top Plastic Engineering Works

 

POLYPROPYLENE VALVES
PP Damper Valves
PP Three Piece Flange End Ball Valve
PP Three Piece Screwed End Ball Valve
PP Union Assembly Screw And Plain End Ball Valve
PP Union Type Assembly Screw And Plain End Ball Valve
PP Diaphragm Flange End Valve
PP Diaphragm Valve Screw End
PP Sight Glass Flange End
PP Non Return Valves Flange End
PP Butterfly Valves
PP Foot Valves Flange End
PP Foot Valves Screw End
 
PP Non Return Valves Flange End
 

PP Non Return Valves Flange End


Bill of Material
Sr.No. Part Qty. Material
1. Top Body 1 Polypropylene
2. Bottom Body 1 Polypropylene
3. Ball 1 Polypropylene
4. Ball Ring 1 Polypropylene
6. Seat Ring 1 Neoprene or all type of Rubber
Technical Data
 
Construction Ball type design, Soft seated
 
Design 2 Piece design
 
Size Range 1, 1.1/2", 2", 2.1/2", 3", 4 and 6"".
Max working temp. 90°C (Consistently)
 
Gasket / Seal Neoprene or all type of Rubber
 
Test Pressure 10 kg upto 4"
6 kg for 6"
 
 
Important Parameters of Valves
Valve Size L T ID OD
1.1/2" 163 19 40 141
2" 186 23 50 168
2.1/2" 219 25 65 181
3" 244 25 75 199
4" 298 25 100 230
Special Features of Non Return Valves Flange End

1. Available in Flange Type in 25 mm to 160 mm and in Screw Type in 25 mm to 100 mm.
2. Manufactured from Poly Propylene, a Chemically inert thermoplastic.
3. Can be used upto 90°C Temp.
4. Hydraulically and Pneumatically tested for 10 Kg upto 4".
5. Protective and Resistive from most of the corrosive Chemicals.
 


 

PP NON RETURN VALVES FLANGE END
 
Copyright 2008 | Plastic Engineering Works. All Rights Reserved.
| | | |