Top Plastic Engineering Works

 

FABRICATED ITEMS
Electroplating Barrels | Electroplating Filter Unit | Electroplating Dryer |
Chemical Storage Tanks / Process Tank / Mixing Tank
Electroplating Tanks
Fume Scrubbers
Centrifugal Exhaust Fan
Hoods & Ductings
FRP MOTOR COVERS
PVC CABLE TRAYS
FRP / GRP Cable Tray
PP Demister Pad
FRP PIPES
FRP PIPE FITTINGS
Other Fabricated Items
HDPE Welding Mirror
Welding Torch
 
PVC CABLE TRAYS
 

I) PVC Cable Trays 

 
 PVC Cable Trays PVC Cable Trays

 

 

PVC-Cable-Tray

 

 

PVC-Cable-Tray

 

 

 

 

Our PVC Cable Tray, supports & other provide a very economical and completely non-corrodible system for cable installations. 

Characteristics PVC cable Trays:
MOC  = PVC 
Range Width  = 50 mm to 500 mm.
Flange Height  = 25 to 100 mm.
Standard Length  = 3 Meters.

Features:
Chemical Resistance
Unaffected by most acids, alkalis and most commonly used chemicals such as ammonia, petrol, hydrogen, potassium chlorate, phosphorous, soap, sodium, sulphate etc.

Linear Expansion 
1/10,000th unit per degree C. Based upon this constant temperature rise of 42 degrees C would increase the length of a 3 meter (9.8 ft) Tray by 12.7 mm(0.5”)

Working Temperature 
From -40 C to + 50 C (-40F to + 122F)

Flammability 
Self extinguishing and non – inflammable for all practical purposes.

Workability 
Can be cut with ordinary saw. Light to handle. (Specific gravity 1.4) Holes cab be drilled with ordinary hand drills. No sharp edges are left after cutting. 

Weathering 
Unaffected by sunlight (Ultra – violet) or water and in use compares favorable with all alternatives.

Jointing of Trays
Each end of tray is socket ed so jointing is easy WITHOUT coupler plate. 

Type available 
PERFORATED & LADDER Type.

 
 

I PVC Cable Trays Accessories

type-r

 

Horizontal Bend

Type-A

 

Horizontal Reducer

 

Horizontal 3 Way “T”

 

Normally not required as all accessories cab be fabricated from cable tray at site by simple hacksaw cutting & bending at room temperature. If need be horizontal fitting like Reducer, Bend T and cross (4 way) can be supplied.  PVC Cable Trays Accessories are manufactured in "One Piece Moulding.

 

Rigid PVC Supporting Bracket

 

PVC Cable Trays

 

Rigid PVC Supporting
Bracket

Used for supporting rigid PVC cable tray or directly laying/supporting cables. Molded from PVC & suitable up to 300 mm width cable Tray.

 

COST  FACTOR:

Quite comparable with GI Perforated cable tray up to 300 mm width, but slightly expensive comparing with GI ladder type trays.
BUT considering the rising Metal prizes and  No Maintenance cost for fairly  long time, these trays are economical.

 

We are sure with changing work culture of preventative maintenance use of  PVC cable Trays is the right answer.

 

PVC CABLE TRAYS
 
PVC CABLE TRAYS
 
Copyright 2008 | Plastic Engineering Works. All Rights Reserved.
| | | |